Rifleman RFL-3Cr
- Type
- BattleMech
- Tech
- Inner Sphere
- Mass
- 60t
- Role
- Brawler
- Intro
- 3071 Jihad
- Rules
- Standard
- Cost
- 5.4M C-bills
- Move
- Armor
- 148 pts
Medium Laser ×2AC/10 ×2
Technical Readout: RGv1 · Record Sheets: RG08
Compare this unit
Availability by era
5 eras · 1 faction
| Gun | Pilot | Adj BV |
|---|---|---|
| G0 | 1 | 2,608 |
| G1 | 2 | 2,281 |
| G2 | 3 | 1,897 |
| G3 | 4 | 1,490 |
| G4 | 5 | 1,129 |
| G5 | 6 | 971 |
| G6 | 7 | 869 |
| G7 | 8 | 768 |
| G8 | 8 | 723 |
Piloting rides one point worse than Gunnery, capped at Piloting 8, the conventional pairing. Regular is Gunnery 4 / Piloting 5.
Recognition notes
The Rifleman RFL-3Cr is a 60-ton brawler, a 3071 rebuild of the 2504 RFL-1N that adds ten tons to the original's 50-ton frame while holding the same 240 fusion engine and its 43/65 km/h cruising and top speeds. Where the RFL-1N carried a large laser and a medium laser in each arm, the RFL-3Cr swaps the arms for a pair of AC/10s and relocates a medium laser to each torso side. Heavy ferro-fibrous armor replaces the original's primitive plating, and CASE lines the right torso; the heat-sink count falls from 12 to 10. Anti-aircraft fire control, a fixed searchlight, and enhanced communications gear carry over from the RFL-1N. Kallon Weapon Industries refits the type at its Kirklin facility.
Armor & loadout
| Weapon / Equipment | Loc | Qty | Ammo |
|---|---|---|---|
| Enr | RT · LT | 2 | |
| Bal | RA · LA | 2 | 50 rds · 5 t in RT |
CASE: Right Torso